JUKI 56MM FTFR DEEP POCKET FEEDER

JUKI 56MM FTFR DEEP POCKET FEEDER FF56FR E8000706RBB E8000-706-RBB

Brand Name :JUKI

Product name:Feeder

Model Number:FF56FR,E8000706RBB,E8000-706-RBB

Condition:original new/compatible new/used original

Lead time:1-3 Days

MOQ : 1 PCS

Juki SMT Feeder:

40081758,CF03HPR,40081759,CF05HPR,40081760,CF08HER,40081761,CF081PR,40081762,CF081ER,E1001706CB0,CF03HP,E1002706CB0,CF05HP,E1004706CB0,CF08HE,E1005706CB0,CF081P,E1003706CB0,CF081E,E1012706CB0,CF8L1P,E1011706CB0,CF8L1E,E1006706CB0,CN05HP,E1008706CB0,CN08HE,E1009706CB0,CN081P,E1007706CB0,CN081E,E1010706CB0,CN081C,40081770,CN081CR,E1014706CB0,CN8L1P,E1013706CB0,CN8L1E,E1015706CB0,CN8L1C,E1001706AB0,AF05HP,E1003706AB0,AF08HE,E1004706AB0,AF081P,E1002706AB0,AF081E,E4004706AB0,AF16NS,E1005706AB0,AN05HP,E1007706AB0,AN08HE,E1008706AB0,AN081P,E1006706AB0,AN081E,E1009706AB0,AN081C,E30007060B0,FF121S,E30017060B0,FF122S,E30027060B0,FF123S,E30037060B0,FF12FS,E30047060B0,FF12NS,E40017060B0,FF162S,E40037060B0,FF16FS,E40047060B0,FF16NS,E50007060B0,FF242S,E50017060B0,FF243S,E50027060B0,FF244S,E50037060B0,FF245S,E50047060B0,FF246S,E50057060B0,FF24FS,E50067060B0,FF24NS,E60007060B0,FF323S,E60017060B0,FF324S,E60027060B0,FF32FS,E6000706RBC,FF32FR-OP,E7000706RBC,FF44FR-OP,E7000706RBB,FF44FR,E7000706RBA,FF444R,E7000706RB0,FF443R,E70007060B0,FF443S,E70017060B0,FF444S,E70027060B0,FF44FS,E80007060B0,FF564S,E80017060B0,FF568S,E8000706RBB,FF56FR,E8000706RBC,FF56FR-OP,E69007050A0,NF3SNS,E00057190A0,SFN0AS,E00107190A0,SFN1AS,E00207190A0,SFN2ASE00307190A0,SFN3AS,E00407190A0,SFN4AS,E02107190A0,SFW1AS,E02207190A0,SFW2AS,E02307190A0,SFW3AS,E02407190A0,SFW4AS,E02507190A0,SFW5AS,E70007160A0,SF70ES.

Installing and calibrating a JUKI feeder onto your pick-and-place machine is a crucial process to ensure proper operation and accurate component placement. Here's a general guide on how to do it:

1.Prepare the Feeder:

  - Ensure that the feeder is clean and free from any debris or obstructions.

  - Check for any damage to the feeder or its components.

2.Prepare the Pick-and-Place Machine:

  - Make sure the pick-and-place machine is powered off and disconnected from the power source.

  - Ensure that the feeder interface on the machine is clean and free from debris.

3.Position the Feeder:

  - Place the feeder in the designated feeder slot or position on the pick-and-place machine.

  - Ensure that the feeder is securely attached and aligned with the feeder interface on the machine.

4.Connect the Feeder:

  - Connect the feeder's interface cable to the corresponding connector on the pick-and-place machine.

  - Make sure the connection is secure and properly seated to prevent any loose connections.

5.Power On the Machine:

  - Power on the pick-and-place machine and wait for it to initialize.

6.Feeder Calibration:

  - Access the feeder calibration menu or settings on the pick-and-place machine's control interface.

  - Follow the manufacturer's instructions or user manual for the specific calibration procedure.

  - Typically, feeder calibration involves adjusting settings such as feeder position, pitch, and component detection parameters to ensure accurate feeding and placement.

  - Use calibration tools or software provided by the manufacturer to fine-tune feeder settings as needed.

  - Test the feeder by running sample component placement jobs to verify accuracy and performance.

7.Final Checks:

  - Double-check all feeder connections and ensure that they are secure.

  - Verify that the feeder is operating correctly and feeding components smoothly.

  - Perform any additional adjustments or fine-tuning as necessary to optimize feeder performance.

8.Documentation:

  - Keep detailed records of the feeder installation and calibration process for future reference.

  - Document any settings or adjustments made during the calibration process for troubleshooting or maintenance purposes.

9.Training and Familiarization:

  - Provide training to operators on how to operate and maintain the feeder properly.

  - Familiarize operators with the feeder's controls, settings, and maintenance procedures to ensure smooth operation.

By following these steps and referring to the specific instructions provided by JUKI for your feeder model and pick-and-place machine, you can install and calibrate the feeder effectively for reliable operation and accurate component placement.

Hot tags:Juki FF56FR feeder,smt FF56FR Juki feeder,Juki FF56FR tape feeder,Juki component feeder FF56FR,Juki E8000706RBB feeder specifications,Juki E8000706RBB feeder compatibility,Juki E8000706RBB feeder setup,Juki E8000-706-RBB feeder calibration,Juki E8000-706-RBB feeder maintenance,Juki E8000-706-RBB feeder parts,china,wholesale, cheap, low price, manufacturers, factory, suppliers, for sale, in stock